-
0.5mm wire roll
EGP 93.000.5mm Wire Roll Generally, wire diameters used in elevators can vary based on the elevator’s designed load and technical requirements.
-
1 Elec wire Set 0.5 mm
EGP 116.000.5mm Wire Roll You should work with professional elevator engineers or elevator system suppliers for precise guidance on the optimal diameter of wire to be used in your elevator project, which meets safety and performance requirements.
-
1 Elec wire Set 1 mm
EGP 175.001mm wire roll, you should keep in mind that wire requirements may change depending on the elevator design, expected maximum load, and local or international technical standards.
-
1 Elec wire Set 10 ends- Long
EGP 324.00A large 10-pin coil of wire used to connect motors and control elevators depends on several factors, including the rated load of the elevator and the distance over which the wire must travel.
-
1 Elec wire Set 10 ends- Short-50m
EGP 155.00Small 10 End Wire Roll – 50m There are many factors to consider, such as the weight of the elevator being carried, adherence to industry standards, the maximum load that the wire will bear, and the necessary precautions to ensure safety and proper perform
-
1 Elec wire Set 10 mm- Long
EGP 251.00Large 10mm Wire Roll – The design and selection of wire depends on several factors, including the expected load of the elevator, the height to which the elevator will rise, and local or international technical and security standards.
-
1 Elec wire Set 10 mm- Short
EGP 135.00A small 10mm wire roll should be based on the specifications and recommendations of engineers involved in the design and installation of elevators. Specifications can vary depending on the maximum load of the elevator, the structural design of the system
-
1 Elec wire Set 12 ends- Long
EGP 360.00Large 12 end wire roll features a large size used in elevator systems. Typically, this type of wire is used to transmit power and signals in elevator systems, which helps move the elevator efficiently and safely.
-
1 Elec wire Set 12 ends- Short
EGP 180.00A small spool of 12-pin wire used in elevator systems. Usually 12-pin is the result of assembling opposite pairs, such as 6 pairs of terminals.
-
1 Elec wire Set 6 mm- Long
EGP 1.00Large 6mm Wire Roll Elevator wires come in a variety of sizes and the size is chosen based on the actual needs of the elevator, such as the expected load, and the height the elevator needs to achieve.
-
1 Elec wire Set 6 mm- Short
EGP 1.00The small 6mm-90m roll of wire is a suitable size used in elevator system. The 6mm wire diameter provides the strength and durability needed to transport loads and move the elevator safely and efficiently.
-
12 mm solid Korean rope
EGP 60.0012mm Korean Steel Rope is a kind of rope made of stainless steel and has a diameter of 12mm. This type of rope is used in a variety of industrial, construction and other applications.
